mxnet.kvstore.KVStore¶
-
class
KVStore
(handle)[source]¶ Bases:
mxnet.kvstore.base.KVStoreBase
A key-value store for synchronization of values, over multiple devices.
-
__init__
(handle)[source]¶ Initializes a new KVStore.
- Parameters
handle (KVStoreHandle) – KVStore handle of C API.
Methods
__init__
(handle)Initializes a new KVStore.
broadcast
(key, value, out[, priority])Broadcast the value NDArray at rank 0 to all ranks, and store the result in out.
init
(key, value)Initializes a single or a sequence of key-value pairs into the store.
is_capable
(capability)Queries if the KVStore type supports certain capability, such as optimizer algorithm, gradient compression, sparsity, etc.
load_optimizer_states
(fname)Loads the optimizer (updater) state from the file.
pull
(key[, out, priority, ignore_sparse])Pulls a single value or a sequence of values from the store.
push
(key, value[, priority])Pushes a single or a sequence of key-value pairs into the store.
pushpull
(key, value[, out, priority])Performs push and pull a single value or a sequence of values from the store.
register
(klass)Registers a new KVStore.
row_sparse_pull
(key[, out, priority, row_ids])Pulls a single RowSparseNDArray value or a sequence of RowSparseNDArray values from the store with specified row_ids.
save_optimizer_states
(fname[, dump_optimizer])Saves the optimizer (updater) state to a file.
set_gradient_compression
(compression_params)Specifies type of low-bit quantization for gradient compression and additional arguments depending on the type of compression being used.
set_optimizer
(optimizer)Registers an optimizer with the kvstore.
Attributes
OPTIMIZER
kv_registry
Returns the number of worker nodes.
Returns the rank of this worker node.
Returns the type of this kvstore.
-
broadcast
(key, value, out, priority=0)[source]¶ Broadcast the value NDArray at rank 0 to all ranks, and store the result in out.
Note that the native KVStore does not support broadcasting the same key more than once.
- Parameters
key (str, or int) – The key.
value (NDArray, list of NDArray, or list of list of NDArray) – Values corresponding to the keys.
out (NDArray or list of NDArray or list of list of NDArray) – Outputs corresponding to the keys.
priority (int, optional) – The priority of the operation. Higher priority operations are likely to be executed before other actions.
Examples
>>> # broadcast a single key-value pair >>> shape = (2,3) >>> kv = mx.kv.create('local') >>> a = mx.nd.zeros(shape) >>> kv.broadcast('3', mx.nd.ones(shape)*2, out=a) >>> print a.asnumpy() [[ 2. 2. 2.] [ 2. 2. 2.]]
-
init
(key, value)[source]¶ Initializes a single or a sequence of key-value pairs into the store.
For each key, one must init it before calling push or pull. When multiple workers invoke init for the same key, only the value supplied by worker with rank 0 is used. This function returns after data has been initialized successfully.
- Parameters
key (str, int, or sequence of str or int) – The keys.
value (NDArray, RowSparseNDArray or sequence of NDArray or RowSparseNDArray) – Values corresponding to the keys.
Examples
>>> # init a single key-value pair >>> shape = (2,3) >>> kv = mx.kv.create('local') >>> kv.init('3', mx.nd.ones(shape)*2) >>> a = mx.nd.zeros(shape) >>> kv.pull('3', out=a) >>> print a.asnumpy() [[ 2. 2. 2.] [ 2. 2. 2.]]
>>> # init a list of key-value pairs >>> keys = ['5', '7', '9'] >>> kv.init(keys, [mx.nd.ones(shape)]*len(keys))
>>> # init a row_sparse value >>> kv.init('4', mx.nd.ones(shape).tostype('row_sparse')) >>> b = mx.nd.sparse.zeros('row_sparse', shape) >>> kv.row_sparse_pull('4', row_ids=mx.nd.array([0, 1]), out=b) >>> print b <RowSparseNDArray 2x3 @cpu(0)>
-
is_capable
(capability)[source]¶ Queries if the KVStore type supports certain capability, such as optimizer algorithm, gradient compression, sparsity, etc.
- Parameters
capability (str) – The capability to query
- Returns
result – Whether the capability is supported or not.
- Return type
bool
-
load_optimizer_states
(fname)[source]¶ Loads the optimizer (updater) state from the file.
- Parameters
fname (str) – Path to input states file.
-
property
num_workers
¶ Returns the number of worker nodes.
- Returns
size – The number of worker nodes.
- Return type
int
-
pull
(key, out=None, priority=0, ignore_sparse=True)[source]¶ Pulls a single value or a sequence of values from the store.
This function returns immediately after adding an operator to the engine. Subsequent attempts to read from the out variable will be blocked until the pull operation completes.
pull is executed asynchronously after all previous pull calls and only the last push call for the same input key(s) are finished.
The returned values are guaranteed to be the latest values in the store.
pull with RowSparseNDArray is not supported for dist kvstore. Please use
row_sparse_pull
instead.- Parameters
key (str, int, or sequence of str or int) – Keys.
out (NDArray or list of NDArray or list of list of NDArray) – Values corresponding to the keys.
priority (int, optional) – The priority of the pull operation. Higher priority pull operations are likely to be executed before other pull actions.
ignore_sparse (bool, optional, default True) – Whether to ignore sparse arrays in the request.
Examples
>>> # pull a single key-value pair >>> shape = (2,3) >>> a = mx.nd.zeros(shape) >>> kv.pull('3', out=a) >>> print a.asnumpy() [[ 2. 2. 2.] [ 2. 2. 2.]]
>>> # pull into multiple devices >>> b = [mx.nd.ones(shape, gpu) for gpu in gpus] >>> kv.pull('3', out=b) >>> print b[1].asnumpy() [[ 2. 2. 2.] [ 2. 2. 2.]]
>>> # pull a list of key-value pairs. >>> # On single device >>> keys = ['5', '7', '9'] >>> b = [mx.nd.zeros(shape)]*len(keys) >>> kv.pull(keys, out=b) >>> print b[1].asnumpy() [[ 2. 2. 2.] [ 2. 2. 2.]] >>> # On multiple devices >>> keys = ['6', '8', '10'] >>> b = [[mx.nd.ones(shape, gpu) for gpu in gpus]] * len(keys) >>> kv.pull(keys, out=b) >>> print b[1][1].asnumpy() [[ 2. 2. 2.] [ 2. 2. 2.]]
-
push
(key, value, priority=0)[source]¶ Pushes a single or a sequence of key-value pairs into the store.
This function returns immediately after adding an operator to the engine. The actual operation is executed asynchronously. If there are consecutive pushes to the same key, there is no guarantee on the serialization of pushes. The execution of a push does not guarantee that all previous pushes are finished. There is no synchronization between workers. One can use
_barrier()
to sync all workers.- Parameters
key (str, int, or sequence of str or int) – Keys.
value (NDArray, RowSparseNDArray, list of NDArray or RowSparseNDArray,) – or list of list of NDArray or RowSparseNDArray Values corresponding to the keys.
priority (int, optional) – The priority of the push operation. Higher priority push operations are likely to be executed before other push actions.
Examples
>>> # push a single key-value pair >>> shape = (2,3) >>> kv.push('3', mx.nd.ones(shape)*8) >>> kv.pull('3', out=a) # pull out the value >>> print a.asnumpy() [[ 8. 8. 8.] [ 8. 8. 8.]]
>>> # aggregate the value and the push >>> gpus = [mx.gpu(i) for i in range(4)] >>> b = [mx.nd.ones(shape, gpu) for gpu in gpus] >>> kv.push('3', b) >>> kv.pull('3', out=a) >>> print a.asnumpy() [[ 4. 4. 4.] [ 4. 4. 4.]]
>>> # push a list of keys. >>> # single device >>> keys = ['4', '5', '6'] >>> kv.push(keys, [mx.nd.ones(shape)]*len(keys)) >>> b = [mx.nd.zeros(shape)]*len(keys) >>> kv.pull(keys, out=b) >>> print b[1].asnumpy() [[ 1. 1. 1.] [ 1. 1. 1.]]
>>> # multiple devices: >>> keys = ['7', '8', '9'] >>> b = [[mx.nd.ones(shape, gpu) for gpu in gpus]] * len(keys) >>> kv.push(keys, b) >>> kv.pull(keys, out=b) >>> print b[1][1].asnumpy() [[ 4. 4. 4.] [ 4. 4. 4.]]
>>> # push a row_sparse value >>> b = mx.nd.sparse.zeros('row_sparse', shape) >>> kv.init('10', mx.nd.sparse.zeros('row_sparse', shape)) >>> kv.push('10', mx.nd.ones(shape).tostype('row_sparse')) >>> # pull out the value >>> kv.row_sparse_pull('10', row_ids=mx.nd.array([0, 1]), out=b) >>> print b <RowSparseNDArray 2x3 @cpu(0)>
-
pushpull
(key, value, out=None, priority=0)[source]¶ Performs push and pull a single value or a sequence of values from the store.
This function is coalesced form of push and pull operations. This function returns immediately after adding an operator to the engine. Subsequent attempts to read from the out variable will be blocked until the pull operation completes.
value is pushed to the kvstore server for the specified keys and the updated values are pulled from the server to out. If out is not specified the pulled values are written to value. The returned values are guaranteed to be the latest values in the store.
pushpull with RowSparseNDArray is not supported for dist kvstore.
- Parameters
key (str, int, or sequence of str or int) – Keys.
value (NDArray, list of NDArray, or list of list of NDArray) – Values corresponding to the keys.
out (NDArray or list of NDArray or list of list of NDArray, optional) – Outputs corresponding to the keys.
priority (int, optional) – The priority of the operation. Higher priority operations are likely to be executed before other actions.
Examples
>>> # pushpull a single key-value pair >>> shape = (2,3) >>> kv.pushpull('3', mx.nd.ones(shape)*8, out=a) >>> print a.asnumpy() [[ 8. 8. 8.] [ 8. 8. 8.]]
>>> # aggregate the value and then pushpull >>> gpus = [mx.gpu(i) for i in range(4)] >>> b = [mx.nd.ones(shape, gpu) for gpu in gpus] >>> kv.pushpull('3', b, out=a) >>> print a.asnumpy() [[ 4. 4. 4.] [ 4. 4. 4.]]
>>> # pushpull a list of keys. >>> # single device >>> keys = ['4', '5', '6'] >>> b = [mx.nd.zeros(shape)]*len(keys) >>> kv.pushpull(keys, [mx.nd.ones(shape)]*len(keys), out=b) >>> print b[1].asnumpy() [[ 1. 1. 1.] [ 1. 1. 1.]]
>>> # multiple devices: >>> keys = ['7', '8', '9'] >>> b = [[mx.nd.ones(shape, gpu) for gpu in gpus]] * len(keys) >>> kv.pushpull(keys, b) >>> print b[1][1].asnumpy() [[ 4. 4. 4.] [ 4. 4. 4.]]
-
property
rank
¶ Returns the rank of this worker node.
- Returns
rank – The rank of this node, which is in range [0, num_workers())
- Return type
int
-
row_sparse_pull
(key, out=None, priority=0, row_ids=None)[source]¶ Pulls a single RowSparseNDArray value or a sequence of RowSparseNDArray values from the store with specified row_ids. When there is only one row_id, KVStoreRowSparsePull is invoked just once and the result is broadcast to all the rest of outputs.
row_sparse_pull is executed asynchronously after all previous pull/row_sparse_pull calls and the last push call for the same input key(s) are finished.
The returned values are guaranteed to be the latest values in the store.
- Parameters
key (str, int, or sequence of str or int) – Keys.
out (RowSparseNDArray or list of RowSparseNDArray or list of list of RowSparseNDArray) – Values corresponding to the keys. The stype is expected to be row_sparse
priority (int, optional) – The priority of the pull operation. Higher priority pull operations are likely to be executed before other pull actions.
row_ids (NDArray or list of NDArray) – The row_ids for which to pull for each value. Each row_id is an 1-D NDArray whose values don’t have to be unique nor sorted.
Examples
>>> shape = (3, 3) >>> kv.init('3', mx.nd.ones(shape).tostype('row_sparse')) >>> a = mx.nd.sparse.zeros('row_sparse', shape) >>> row_ids = mx.nd.array([0, 2], dtype='int64') >>> kv.row_sparse_pull('3', out=a, row_ids=row_ids) >>> print a.asnumpy() [[ 1. 1. 1.] [ 0. 0. 0.] [ 1. 1. 1.]] >>> duplicate_row_ids = mx.nd.array([2, 2], dtype='int64') >>> kv.row_sparse_pull('3', out=a, row_ids=duplicate_row_ids) >>> print a.asnumpy() [[ 0. 0. 0.] [ 0. 0. 0.] [ 1. 1. 1.]] >>> unsorted_row_ids = mx.nd.array([1, 0], dtype='int64') >>> kv.row_sparse_pull('3', out=a, row_ids=unsorted_row_ids) >>> print a.asnumpy() [[ 1. 1. 1.] [ 1. 1. 1.] [ 0. 0. 0.]]
-
save_optimizer_states
(fname, dump_optimizer=False)[source]¶ Saves the optimizer (updater) state to a file. This is often used when checkpointing the model during training.
- Parameters
fname (str) – Path to the output states file.
dump_optimizer (bool, default False) – Whether to also save the optimizer itself. This would also save optimizer information such as learning rate and weight decay schedules.
-
set_gradient_compression
(compression_params)[source]¶ Specifies type of low-bit quantization for gradient compression and additional arguments depending on the type of compression being used.
The 1bit compression works as follows: values which is above the threshold in the gradient will be set to +1, whereas values below threshold will be set to -1.
2bit Gradient Compression takes a positive float threshold. The technique works by thresholding values such that positive values in the gradient above threshold will be set to threshold. Negative values whose absolute values are higher than threshold, will be set to the negative of threshold. Values whose absolute values are less than threshold will be set to 0. By doing so, each value in the gradient is in one of three states. 2bits are used to represent these states, and every 16 float values in the original gradient can be represented using one float. This compressed representation can reduce communication costs. The difference between these thresholded values and original values is stored at the sender’s end as residual and added to the gradient in the next iteration.
When kvstore is ‘local’, gradient compression is used to reduce communication between multiple devices (gpus). Gradient is quantized on each GPU which computed the gradients, then sent to the GPU which merges the gradients. This receiving GPU dequantizes the gradients and merges them. Note that this increases memory usage on each GPU because of the residual array stored.
When kvstore is ‘dist’, gradient compression is used to reduce communication from worker to sender. Gradient is quantized on each worker which computed the gradients, then sent to the server which dequantizes this data and merges the gradients from each worker. Note that this increases CPU memory usage on each worker because of the residual array stored. Only worker to server communication is compressed in this setting. If each machine has multiple GPUs, currently this GPU to GPU or GPU to CPU communication is not compressed. Server to worker communication (in the case of pull) is also not compressed.
To use 2bit compression, we need to specify type as 2bit. Only specifying type would use default value for the threshold. To completely specify the arguments for 2bit compression, we would need to pass a dictionary which includes threshold like: {‘type’: ‘2bit’, ‘threshold’: 0.5}
- Parameters
compression_params (dict) – A dictionary specifying the type and parameters for gradient compression. The key type in this dictionary is a required string argument and specifies the type of gradient compression. Currently type can be only 1bit and 2bit Other keys in this dictionary are optional and specific to the type of gradient compression.
-
set_optimizer
(optimizer)[source]¶ Registers an optimizer with the kvstore.
When using a single machine, this function updates the local optimizer. If using multiple machines and this operation is invoked from a worker node, it will serialized the optimizer with pickle and send it to all servers. The function returns after all servers have been updated.
- Parameters
optimizer (Optimizer) – The new optimizer for the store
Examples
>>> kv = mx.kv.create() >>> shape = (2, 2) >>> weight = mx.nd.zeros(shape) >>> kv.init(3, weight) >>> # set the optimizer for kvstore as the default SGD optimizer >>> kv.set_optimizer(mx.optimizer.SGD()) >>> grad = mx.nd.ones(shape) >>> kv.push(3, grad) >>> kv.pull(3, out = weight) >>> # weight is updated via gradient descent >>> weight.asnumpy() array([[-0.01, -0.01], [-0.01, -0.01]], dtype=float32)
-
property
type
¶ Returns the type of this kvstore.
- Returns
type – the string type
- Return type
str
-